D6 Labs™Engineered IoT SolutionsWhskeroTMwww.d6labs.comPage 1sales@d6labs.com© Copyright 2026 Digital Six Laboratories, All Right Reserved1-844-365-8647WB1-9-xx-A4A4A4A4-0000-xxWhisker.Block® 4-20 mA Analog InputsD6 Labs Whisker-Block_3qtr-View_01General DescriptionA long-range, 900 MHz, wireless sensor in a durable, transulcent IP67 case with LED feedback, including four external input channels for connecting 420 mA analog sensors. The external sensors come pre-fastened to the included wire bundles that connect to the Whisker.Block® via M8 connectors. Also included is an internal, on-board, thermistor with +/- 1°C accuracy. By default, readings are taken every five minutes and battery life will last over ten years on the included battery pack.PowerThis Whisker.Block® can be powered internally using a 3.7V, 5.2A-H LiThCl battery pack (10+ years of service life) or 8-24V DC through Connector 1 pin 1. Select variants are equipped with an internal 5V/18V sensor power supply that can provide up to 30mA to external sensors; this is available on pin 1 on both connectors when battery power is used and pin 1 of connector 2 when external DC power is used.RangeIn an unobstructed, outdoor line-of-site environment, the sensor should be able to communicate for more than .5 miles assuming a receiving antenna elevation of 10 feet. If the receiving antenna is raised to 20 feet or more, the range should increase to more than 1 mile. Range performance will degrade if the internal antenna is used; maximum range is achieved with the external antenna.Internal ChannelsThis Whisker.Block® is configured with two (2) internal channels:VDCBattery VoltageAmbient TemperatureExternal ConnectionsThis Whisker.Block® is configured with four (4) external channels:4231Con 2 (Left)4231Con 1 (Right)ConnectorPinFunctionDescription11Vin(Vout)8-24V Input (Sensor Voltage Out)12Channel 14-20 mA Analog Input13Channel 24-20 mA Analog Input14GroundCircuit ground21VoutSensor Supply Voltage22Channel 34-20 mA Analog Input23Channel 44-20 mA Analog Input24GroundCircuit groundOrdering InformationPart NumberDescriptionWB1-9-0D-A4A4A4A4-0000-XR4-20 mA Analog Input (x4), 900 MHz, 8-24V Ext DC, External AntennaWB1-9-0D-A4A4A4A4-0000-LR4-20 mA Analog Input (x4), 900 MHz, 8-24V Ext DC, Internal AntennaWB1-9-50-A4A4A4A4-0000-XR4-20 mA Analog Input (x4), 900 MHz, External AntennaWB1-9-50-A4A4A4A4-0000-LR4-20 mA Analog Input (x4), 900 MHz, Internal AntennaWB1-9-10-A4A4A4A4-0000-XR4-20 mA Analog Input (x4), 900 MHz, External AntennaWB1-9-10-A4A4A4A4-0000-LR4-20 mA Analog Input (x4), 900 MHz, Internal Antenna
WhskeroTMwww.d6labs.comPage 2sales@d6labs.com© Copyright 2026 Digital Six Laboratories, All Right Reserved1-844-365-8647Mechanical Drawing - Whisker.Block® 4-20 mA Analog InputsD6 Labs Whisker.Block Product DiagramProduct AttributesTypeDescriptionSeriesWhisker.io®Features(4) 4-20 mA Analog Inputs, M8 Cable Assembly & Internal (Onboard) TempSensor TypeQuad Analog Inputs Sensor BlockBattery3.7V, 5.2A-H LiSOCLBattery Life Standard Pack10-20 YearsDC Power8-24V DC, 100mA maxOperating Temperature Range-40 - 185°FAntennaInternal (LR) / External RPSMA (XR)Transmission Range11 mile (typical)Frequency Range902-928 MHzInternal Temperature Measurement Range-40 - 185°FInternal Temperature Measurement Accuracy±1.8°FSensor Sample Rate5 Minutes(battery power) /10 Seconds(DC power)(typical)EnclosureModule - IP67 CasePackagingBoxAnalog Input Current Range4-20 mASensor Power Range5V/18V (30mA) - see order information1) Typical range: Outdoors, external antenna, line of sight, unobstructed, antenna elevation 40 feet.